Details
Surface Preparation: All surfaces to be
sealed should be free of all dirt, oil, dust, etc.
Severe contamination can be removed with a
pressure washer or sandblasting. Allow
surface to dry for 24 hours after washing. S815 Concrete Sealer can be applied to freshly
poured concrete as soon as it is able to receive
foot traffic (typically 24hours). Protect
surrounding areas from over-spray.
Mixing Instructions: Ready to use, no mixing
needed.
Application: Sealer can be applied using
either a brush, medium to thick pile roller or a
solvent approved pump up airless sprayer.
Apply two coats of S-815 Concrete Sealer for
maximum long-term protection. Do not leave
excess sealer in low spots, back roll with roller
to ensure even application.