Details
Surface Preparation: All surfaces to be
sealed should be free of all dirt, oil, dust, etc.
Severe contamination can be removed with a
pressure washer or sandblasting. Allow
surface to dry for 24 hours after washing.
S-830 Concrete Sealer should not be applied
to freshly poured concrete. Allow concrete to
cure 7-10 days before application. Protect
surrounding areas from over-spray.
Mixing Instructions: Ready to use, no mixing
needed.
Application: Sealer can be applied using
either a brush, medium to thick pile roller or a
solvent approved pump up airless sprayer.
Apply two coats of S-830 Concrete Sealer for
maximum long-term protection. Do not leave
excess sealer in low spots, ba